Dolphin Centrifuge provides comprehensive operator training for Alfa Laval industrial centrifuges. Programs cover centrifuge startup, daily operation, sludge ejection adjustment, bowl assembly, troubleshooting, and preventive maintenance. Training is available on-site at your facility, in-house at our Warren, Michigan workshop, or via virtual sessions. Based in Warren, Michigan, Dolphin Centrifuge has over 40 years of hands-on experience with disc stack and decanter centrifuges across all major industries.
Startup Assistance and Centrifuge Training at Customer Site
Dolphin Centrifuge provides comprehensive operational training for Alfa Laval industrial centrifuges. We offer this training on-site or in-house at our facility in Warren, MI.
The on-site industrial centrifuge service and training are integral to our services. This training assures the customer of the best use of the centrifuge safely and efficiently.
After delivery and site installation, our technicians check the entire centrifuge system. We involve the customer's operating staff in this inspection. This step familiarizes the operators with every aspect of the mechanical and electrical sub-systems.
Our industrial centrifuge startup and training include:
- Complete mechanical & electrical check of the centrifuge installation.
- Bowl Installation by site personnel under our technical supervision.
- Initial startup of the centrifuge and test run to check operating parameters.
- Process customer products through a centrifuge.
- Optimize centrifuge to customers' fluid characteristics for optimum efficiency.
- Monitor and record operating parameters for future reference.
- Comprehensive Dolphin Control System operation training.
- Test sub-system components (pumps, heaters, sludge handling system, etc.) and adjust as needed.
- Trigger various system alarms and train personnel on centrifuge troubleshooting.
- System shut-down sequence by site personnel under our tech's supervision.
- Bowl disassembly and re-assembly by site personnel under our tech's supervision.
Dolphin Centrifuge also provides on-site centrifuge service options as part of a PM schedule or on an as-needed basis.
Industrial Centrifuge Operational Training (In-House)
Dolphin offers operator training when you buy a centrifuge system from us. Customer operator(s) sent to our workshop get hands-on training on the centrifuge system.
The testing phase of our manufacturing process is the best time for this training. Due to licensing limitations, water is the testing fluid.
Our in-house training covers above listed operational aspects of the centrifuge system. We encourage your personnel to operate the centrifuge and control system during training.
We also train them to tear down & rebuild the centrifuge bowl. This exercise familiarizes the operators with the inner mechanical details of the centrifuge system.
Contact Dolphin Centrifuge for more information and to set up a centrifuge training session.
Why Training Matters
An industrial centrifuge is a precision machine operating at extreme speeds. Proper operator training directly impacts separation performance, equipment lifespan, and workplace safety. A trained operator can identify developing problems before they become expensive failures, optimize separation parameters for changing feed conditions, and perform routine maintenance — including proper centrifuge lubrication — that prevents unplanned downtime.
Our training programs draw on over 40 years of field experience. Our instructors are the same technicians who rebuild centrifuges in our Warren, Michigan facility and commission turnkey systems at customer sites worldwide. They teach what actually matters in real-world operation, not textbook theory.
Schedule Centrifuge Training for Your Team
On-site, in-house, or virtual sessions tailored to your equipment and process.
Training Programs
New System Commissioning Training
Included with every new centrifuge system purchase from Dolphin Centrifuge. Conducted on-site during system startup, this training covers your specific equipment, process, and control system. Operators leave the session fully qualified to run the equipment independently.
Operator Fundamentals
A comprehensive 1–2 day program covering the principles and hands-on skills needed to operate an industrial centrifuge safely and effectively. Topics include:
- Centrifuge operating principles (disc stack and/or decanter)
- Pre-start inspection and startup procedures
- Normal operating parameter monitoring
- Shutdown and cleaning procedures
- Safety hazards and lockout/tagout requirements
- Control panel operation and alarm response
- Feed preparation and temperature management
Maintenance & Bowl Assembly
An advanced 1–2 day program for maintenance technicians who will perform routine service and preventive maintenance. This is a hands-on course that involves working with actual centrifuge components. Topics include:
- Complete bowl disassembly and reassembly
- Disc stack inspection, cleaning, and reinstallation
- Seal and O-ring replacement
- Bearing inspection and replacement criteria
- Vibration monitoring and interpretation
- Operating water system adjustment and testing (self-cleaning models)
- Preventive maintenance schedules and checklists
- Lubrication procedures and specifications
Troubleshooting & Optimization
An advanced course for experienced operators and process engineers who want to maximize centrifuge performance and diagnose problems efficiently. Topics include:
- Interpreting separation quality (effluent clarity, moisture content, solids dryness)
- Adjusting gravity disc sizing and back-pressure for disc stack separators
- Scroll differential speed and pond depth adjustment for decanters
- Diagnosing common faults: vibration, foaming, poor separation, high motor current
- Optimizing feed temperature, flow rate, and chemical dosing
- Reading and acting on vibration analysis data
Training Delivery Options
| Format | Duration | Best For |
|---|---|---|
| On-Site at Your Facility | 1–3 days | Hands-on training with your specific equipment and process |
| At Our Warren, MI Facility | 1–2 days | Bowl assembly training with access to our full shop and parts inventory |
| Virtual / Remote | Half-day sessions | Refresher training, theory, control system operation, troubleshooting review |
Who Should Attend?
- Operators: Personnel responsible for daily centrifuge operation and monitoring
- Maintenance Technicians: Staff performing preventive maintenance and repairs
- Process Engineers: Engineers responsible for optimizing separation performance
- Supervisors: Plant managers and shift leaders who oversee centrifuge operations
- New Hires: Replacement staff or new team members joining an existing centrifuge operation
Training Materials
All training participants receive:
- Printed training manual specific to your centrifuge model and application
- Preventive maintenance checklists and schedules
- Troubleshooting guide with common fault diagnosis
- Certificate of completion for each attendee
To schedule training or request a customized training program, contact us at sales@dolphincentrifuge.com or call (248) 522-2573.